Oil Skimmer Boom

Oil & Chemical Absorbent Boom
An OPEC Sorbent Boom is a fibre filled woven fabric that has been stitched closed. This basically means that the fibre filling adsorbs the oil while allowing the water to pass through, effectively acting as a filter which does not allow the oil to pass outside the boomed area.
The fibre filling is a special polypropylene crimped fibre opened and blown into the fabric. The fibre is specially treated to make it hygroscopic, (repels water). The material is already oleophillic, (has an affinity for hydrocarbons).
The fabric cover is produced from polypropylene fabric which is woven with sufficient picks to allow total enclosure of the fibre whilst allowing an ingress of oil.
Each section of the SB 8/10 booms have rope support and velcro for to create strength as well as a seal.
The rope support is stitched into a special selvage in the outer fabric of the cover and provides the strength to allow multiple booms to be joined together. Each length of rope is spliced at each end, with one ring and one clip to allow quick, safe connection. The rope and overall length including the ring and clip is slightly shorter than the overall length of the boom to allow an overlap of an adjoining boom.
The velcro is stitched into the outer cover at each end of the boom to form a seal at each end to reduce the possibility of leakage of oil from each section
Two standard sizes are available:
SB 8/10 - Nominal 8 wide and 10 long
SB _ - Nominal 3 wide and 4 long